VX-3308WM Wall Mount Voice Evac System

VX-3308WM Wall Mount Voice Evac System

VX-3308WM Wall Mount Voice Evac System

VX-3308WM

The VX-3308WM is a combined PA and VA system based on the VX-3000 system and is certified according to the European Standard EN54-16. It is designed to be wall-mounted requiring little space and can be operated as a stand-alone unit as well as being combined with all VX-3000 units. Due to the scalable and integrated architecture of the VX-3000 system, the VX-3308WM is an ideal solution for distributed locations, for example, to cover the many floors of a high-rise building.

EN certification

(*1) TOA's unique technology which makes it possible to transmit high-quality audio signals in real time over an IP network
(*2) 0 dB = 1 V

Power Source 220 - 230 V AC, 50 Hz
Power Consumption 1100 W max in total (at rated output with charging)
460 W max in total (EN60065)
Current Specification Maximum output current from the battery: 25 A
Rated maximum continous output current, I max. a: 25 A
Rated maximum short duration output current, I max. b: 25 A
Rated minimum output current, I min: 0 A
Ripple Voltage at I mac. b: 4 V max
DC Power Output 1 x 31 V (19-33 V) 30 A max, M4 screw terminal, distance between barriers: 11 mm
1 x 24 V (16-25 V) 0.3 A max, removable terminal block (4 pins)
Charging Method Temperature compensated trickle charging
Charging Output Voltage 27.3 V ±0.3 V (at 25℃)
Temperature correction coefficient: -40mV/℃
Applicable Battery Panasonic: LC-X1265PG/APG (65 Ah)
LAN A, B Number of Connectors: 2 (LAN A, LAN B)
Network I/F: 100BASE-TX
Network Protocol: TCP, UDP, ARP, ICMP, RTP, IGMP, FTP, HTTP
Spanning tree Protocol: RSTP
Audio Transmission System: TOA Packet Audio (*1)
Audio Encoding Method: PCM
Audio Sampling Frequency: 48 kHz
Audio Quantifying Bit Number: 16 bits
Connection Device: VX-3004F, VX-3008F, VX-3308WM, VX-3016F, NX-300, Switching HUB
Connector: Removable terminal block (9 pins) x 2
Connection Cable: Category 5 twisted pair cable (CAT5) or greater
Number of Stages of Cascade connection: UP to 7
Maximum Cable Distance: 100 m
RS Link A, B Number of Connectors: 2 (RS LINK A, RS LINK B)
Audio input level: 0 dB (*2)
Power feed: Max. 1 A per connector
Connector: Removable terminal block (9 pins) x 2
Connection Cable: Shielded Category 5 twisted pair cable (CAT5-STP) or greater
Maximum Cable Distance: 1200 m
Control Input 1, 2 16 inputs, no-voltage make contact input, open voltage: 24 V DC, short-circuit current: 2 mA
Fault Detection System: Short circuit, Open circuit, Method: Voltage detect
Connector: Removable terminal block (9 pins) x 3
Connection Cable: Shielded Category 5 twisted pair cable (CAT5-STP) or greater
Emergency Control IN Input 2: Isolated voltage input, -24 to +24 V
Connector: Removable terminal block (5 pins)
Connection Cable: Category 5 twisted pair cable (CAT5) or greater
VOX Function Threshold: -60 to 0 dB (1 dB steps)
Hysteresis: 0 to +10 dB, Hold time: 10 ms - 10 s
Settable for each audio input
Control Output 1, 2 General outputs : 8
No-voltage make contact, electrical contact output
Control current: 10 mA, withstand voltage: 28 V DC
Connector: Removable terminal block (9 pins)
Connection Cable: Shielded Category 5 twisted pair cable (CAT5-STP) or greater
ATT/Control Output 4 outputs, no-voltage make contact, relay contact (NC, NO, C)
Control current: 2 mA to 5 A, withstand voltage: 125 V AC, 40 V DC
Connector: Removable terminal block (12 pins)
Connection Cable: Shielded Category 5 twisted pair cable (CAT5-STP) or greater
Audio Input 1, 2, 3, 4 4 inputs
Sensitivity:
LINE: -20 dB (*2), MIC: -60 dB (*2)
LINE/MIC/ANC Sensor (changeable with setting software)
Gain Control: volume adjustable with volume control (internal front panel)
- ∞ to 0 dB
Input Impedance: 47 kΩ, electronically-balanced
Frequency Response: 40 Hz - 20 kHz ±1 dB (at DA CONTROL LINK, 0 dB output)
Distortion: 1% or less (at DA CONTROL LINK, 0 dB output, 1 kHz)
Signal to Noise Ratio: 60 dB or more (at DA CONTROL LINK, A-weighted)
Phantom Power Supply: 24 V DC, can be set with setting software
Connector: Removable terminal block (6 pins) …2

Digital Signal Processing
Feedback Suppression Function 7 filters (auto)
Settable for each audio input and RS LINK (A/B)
Equalizer/Filter 3 bands for each audio input and RS LINK (A/B), 6 bands for each amplifier output
Parametric equalizer: 20 Hz - 20 kHz, ±15 dB, Q: 0.267 - 69.249
Filtering: High-pass filter 20 Hz - 20 kHz, 6 dB/oct, 12 dB/oct
              Low-pass filter 20 Hz - 20 kHz, 6 dB/oct, 12 dB/oct
              High shelving filter 6 - 20 kHz, ±15 dB
              Low shelving filter 20 - 500 Hz, ±15 dB
              Notch filter (amplifier output only) 20 Hz - 20 kHz, Q: 8.651 - 69.249
              All-pass filter (amplifier output only) 20 Hz - 20 kHz, Q: 0.267 - 69.249
              Horn equalizer (amplifier output only) 20 kHz, 0 to +18 dB (0.5 dB steps)
Compressor Threshold: -20 to 0 dB (1 dB steps)
Ratio: 1:1, 1.1:1, 1.2:1, 1.3:1, 1.5:1, 1.7:1, 2:1, 2.3:1, 2.6:1, 3:1, 4:1, 5:1, 7:1, 8:1, 10:1, 12:1, 20:1, ∞:1
Attack time: 0.2 ms - 5 s, Release time: 10 ms - 5 s
Gain: - ∞ to +10 dB, Knee type: hard knee, middle knee, soft knee
Delay For each amplifier output, 0 - 2730 ms (0.021 ms steps)
ANC(Ambient Noise Control) Amplifier output level control, Automatic sensor input reference level measuring, Sensor input reference level fine adjustment
Maximum output signal level control: -15 to 0 dB
Minimum output signal level control: -18 to -3 dB
Sample time setting: 10 s, 20 s, 30 s, 1 min, 5 min
Gain ratio setting: (Ambient noise: Output signal level) 6:3, 5:3, 4:3, 3:3, 3:4, 3:5, 3:6 Ambient noise
Measuring frequency setting: 20 Hz - 20 kHz, 3 points
Speaker Line 8 channels, 8 Earth terminal
Maximum Voltage/Current: 100 Vrms, 5 Arms
Connector: Removable terminal block (6 pins) x 4
Fault Detection System: Short circuit, Open circuit, Ground fault
Method: Impedance or End of line
Power Amplifier Number of Amplifiers: 
  Max: VX-030DA x 3 (2 for zone and 1 for standby)
  Factory preset: VX-030DA x 2 (1 for zone and 1 for standby)
Connector: DA CONTROL LINK x 3, DA OUTPUT LINK x 3
Indicators AC POWER IN (green) …1, RUN (green) …1, EMERGENCY (red) …1, CPU OFF (red) …1, LAN A (green) …1, LAN B (green) …1, RS LINK A (green) …1, RS LINK B (green) …1
FAULT STATUS (yellow)
GENERAL …1, UNIT …1, NETWORK …1, EMG MIC …1, FUSE …1, POWER …1, CPU …1, ZONE …8
AMPLIFIER
PEAK (red) …3, SIGNAL (green) …3, OPERATE (green) …3, POWER (green) …3
BATTERY
CHARGING (green) ...1, POWER (green) ...1, CONNECT (green) ...1, CONDITION (green) ...1
Operation Fault Control Switch x 2 (ACK/RESET), Battery Test x 1, Power Supply Reset x 1, Test Switch x 1 (LAMP TEST)
Setting Switch: ID Number x 1, Reset x 1, Impedance x 1
Settling (internal front panel): DS Link Terminate x 1
Battery Internal Resistance x 1, Charge Current x 1, AC Power Loss x 1
Operating Temperature -5 ℃ to +45 ℃
Operating Humidity 90 %RH or less (no condensation)
Finish Panel: Surface-treated steel plate, black, 30 % gloss, paint
Dimensions 550 (W) × 700 (H) × 202.3 (D) mm
Weight 33.1 kg (Including VX-030DA x 2)
Accessory Removable terminal plug (4 pins) …1, Removable terminal plug (5 pins) …1, Removable terminal plug (6 pins) …6, Removable terminal plug (9 pins) …8, Removable terminal plug (12 pins) …1, Battery cable (490mm) ...1, DA control link cable ...1, DA output link cable ...1, DC fuse (30A) ...1, DC fuse (7.5A) ...1, Key ...2, Wall Mounting pattern paper ...1

Scroll to top