A-9500D2 *AS Model*
TOA’s A-9500D2 designed to be used in conjunction with optional modules and can be configured up to 8 inputs and 8 ouputs. Combining both the 9000 series modules and existing 900 series input modules, the most appropriate modules can be selected depending on every individual applications.
- (*1) 0 dB = 1 V
- (*2) Allowing it to be controlled by a control system such as AMX & Creston through RS-232C port.
- *AMX and Creston is a trademark of AMX Corporation & Creston Electronics, Inc respectively.
Software version (2.10), Firmware version (2.11)
Power Source | 220 - 240 V AC, 50/60 Hz |
---|---|
Power Consumption | 220 W |
Audio Input | Max. 8 channels, modular construction |
Speaker Output 1, 2 | 100V, 500W, 20Ω, M4 screw terminal |
Amplification System | Class D |
Module Slot | Analog input (slot 1 - 8): -10 dB(*1), 10 kΩ, unbalanced Digital input (slot 1 - 4): 24 bit/48 kHz MIX output (slot 1 - 8): -14 dB(*1), 330 Ω (CH 1 prefader output), unbalanced Digital output (slot 5 - 7): 24 bit/48 kHz Power supply (slot 1 - 8): +24 V, -24 V, +6 V DC |
Digital Audio Signal Reference Level | -20 dB FS |
Frequency Response | 20 Hz - 20 kHz, +1, -3 dB |
Total Harmonic Distortion | 0.3 % |
S/N Ratio | At Input short, 20 Hz - 20 kHz, ALL FLAT or OFF setting Output volume min.: 85 dB Output volume max.: 61 dB (Input 1 volume: 0 dB, Other Inputs: OFF) |
Cross Talk | Over 60 dB (at 20 kHz) |
Tone Control | Bass: ±12 dB (at 100 Hz) Treble: ±12 dB (at 10 kHz) |
Parametric Equalizer | 10 bands, Frequency: 20 Hz - 20 kHz, 31 points, Variable range: ±12 dB, Q: 0.3 - 5 |
Speaker Equalizer | 10 (PC software has 30 TOA speaker presets) |
High-pass Filter | -12 dB/oct, Variable frequency range: 20 Hz - 20 kHz, 31 points |
Low-pass Filter | -12 dB/oct, Variable frequency range: 20 Hz - 20 kHz, 31 points |
Compressor | Depth: 1 - 5 |
Delay | 0 - 40 ms (1 ms steps), maximum 40 ms (CH 1 + CH 2), mixer mode only |
Scene/Event Memory | 32 |
Auxiliary Function | Key lock function |
Control Input/Output | RS-232C(*2), D-sub connector (9 P, female) Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3 V DC, short-circuit current: under 1 mA, removable terminal block (14 pins) Control output: 4 outputs, open collector output, withstand voltage: 27 V DC, control current: 50 mA, removable terminal block (14 pins) Remote volume: 2 channels, connect a 10 kΩ/linear taper variable resistor or input the DC voltage of 0 to +10 V, removable terminal block (14 pins) |
Operating Temperature | -10 ℃ to +40 ℃ (14 ゜F to 104 ゜F) |
Operating Humidity | 35 % to 80 % RH (no condensation) |
Finish | Panel: Aluminum, hair-line, black Case: Surface-treated steel plate, black, paint |
Dimensions | 420 (W) × 107.6 (H) × 415 (D) mm (16.54" × 4.24" × 16.34") |
Weight | 9.6 kg (21.16 lb) |